Licenses And Eim Card; Licences; Eim Card - Aastra 470 System Manual

Operation and Maintenance
Note:
Prebarring the system can be dispensed with if all concerned are aware
that existing connections will be disconnected.
Shutting down the call manager
Shut down the call manager via the control panel (see
6. 3. 2

Licenses and EIM card

The license information and IP address of the communication server's Ethernet in-
terface are stored on the EIM card.
6. 3. 2. 1

Licences

To expand a system already in operation or to re-order a licence for a new system
(see "Licences", page
1. Order the licences you require from your authorized dealer, specifying the EID
number, which is used to identify the communication server.
2. The new licence code can be obtained either from your authorized dealer or via
the Aastra 400 activation portal on the extranet using the EID (partner login re-
quired).
3. Enter the licence code under
munication server.
4. The newly licensed features are enabled. It is not necessary to restart the com-
munication server (exception: AIN licences).
6. 3. 2. 2

EIM card

The EIM card must be replaced in the following cases:
• A licence is transferred to another communication server
• The call manager card is defective
• The EIM card is defective
A licence is transferred to another system of the same type
A licence can only be transferred to a communication server of the same type. To
do so you need to replace the EIM card with the licence information.
222
70), proceed as follows:
CM_1.2_Licence code
"On/Off key", page
in AMS and save it in the com-
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
240).