Boot Software; System-Specific Data; Updating Configuration Data - Aastra 470 System Manual

Operation and Maintenance
Note:
Modifying or deleting files on the file system of the communication
server can result in a system that is no longer able to run.
See also:
The WebAdmin configuration tool also provides upload and download
functions as well as access to the file system of the communication server.
6. 1. 1. 3

Boot software

The boot software is stored in a different Flash memory, which allows the commu-
nication server to start up in the boot mode, even if without executable system
software.
6. 1. 1. 4

System-specific data

The system-specific data (system ID, system type, sales channel, licence code, gen-
eration, DECT identification numbers, IP address of the Ethernet interface on the
communication server) is stored on the EIM card (chip card). This data is not de-
leted by a first start of the PBX, and remains available. It can be ported to a different
communication server by replacing the EIM card.
6. 1. 2

Updating configuration data

There are system-wide, user-related and terminal-related configuration data:
• System-wide configuration data can only be modified using AMS or WebAdmin.
• Terminal configuration data such as key assignments or ringing melodies can be
modified either directly on the terminal, with AMS or with WebAdmin. With
some system phones configuration is also possible using the web user interface
or with the help of configuration files.
• User-related configuration data such as private contacts or CFUs is valid for all
the terminals assigned to the user and can be configured using AMS or
WebAdmin, in some cases directly on the terminal itself.
Access to the configuration data via AMS or WebAdmin is regulated by a User Ac-
cess Control with user accounts, authorization profiles and authorization levels.
More information can be found in the Chapter
212
"Configuration", page
syd-0337/1.5 – R3.0 – 05.2013
184.
Aastra 470 ab R3.0