Aastra 470 System Manual page 239

Copying local settings using a standard microSD card
This process is helpful when multiple cordless phones have to be preconfigured
with the same local settings.
1. Make the desired local settings on a master cordless phone without microSD
card.
2. Switch off the master cordless phone, insert a standard microSD card and restart
the master cordless phone.
3. Confirm the notification that the microSD card is invalid.
4. Select Menu - Settings
and copy all user data into the microSD card.
-> The card is now specially marked as a copy card.
5. Switch off the master cordless phone, remove the card and insert it into the tar-
get cordless phone where the data should be copied.
6. Start the target cordless phone and confirm the notification for using the user
data on the card.
7. Copy all user data from the card to the memory on the target cordless phone.
-> The destination cordless phone restarts
8. Switch off the destination cordless phone and remove the card.
-> After the target cordless phone is switched back on, the copied user data will
be used.
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
- General - Administration
Operation and Maintenance
- Diagnostics - File Mgmt. Device
239