Enabling Remote Access; Access Enabled By Local Users - Aastra 470 System Manual

5. 4

Enabling remote access

With remote access the user is authenticated using his user name and password.
The user account must also be assigned an authorization profile in which the inter-
face access Remote maintenance via dial-up access
5. 4. 1

Access enabled by local users

Remote access can be enabled in three ways:
• Using function codes (see
• With the AMS Configuration Manager
• Via the system assistant on the Office 45
It can be revoked again automatically or manually.
All enabling types have equal authorization status. This means that remote access
can be enabled using a function code for example, and then barred again using the
Remote maintenance
When remote maintenance is activated, the event message
on is sent to the local printer and to all the terminals registered in message group
16.
Remote access can be enabled or barred using the function codes both from the
idle state and the talk state, e.g. after an enquiry.
The authorization to activate/deactivate remote access using function codes can
be allocated in the user configuration
After a first start of the communication server, the authorizations of all users are re-
stricted.
Note:
It is advisable not to keep the remote access authorization permanently
activated. This ensures that the communication server data cannot be
manipulated from a remote location by unauthorized persons.
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
page 198)
setting in AMS or with the System Assistant on the Office 45.
(Remote maintenance =
Configuration
is enabled.
Remote maintenance
Yes).
197