Working Online (Communication Server Database) - Aastra 470 System Manual

Configuration
5. 5. 2

Working online (communication server database)

Configuration data in the communication server database can only be accessed in
the online mode. The following functions are available:
Connect (Online)
The communication server is connected with the AMS Shell and automatically
loads the configuration data of the communication server into the PC's main mem-
ory.
Disconnect (Online)
Closes all the AMS Managers and disconnects the online connection between the
PC and the communication server. If configuration data has been changed, but not
yet stored in the communication server with Save, AMS displays a prompt asking
whether the configuration should be saved. AMS will then ask you whether you
want to update the local AMS database.
Save
The modified configuration data is stored in the communication server file system
and the check marks alongside the modified parameters are cleared. Saving always
stores the data from all the AMS Managers.
Download (Communication server-> AMS)
During the download via the AMS Shell the configuration data is downloaded from
the file system of the communication server to the AMS database.
During the download the system is automatically prebarred and then released
once the operation is completed. Existing connections are retained. The progress
of the download operation is indicated by a progress indicator bar in a window. A
download can be carried out when the system is operating under full-load condi-
tions.
Download view
This function loads configuration data from the current window in a AMS Manager
from the file system of the communication server to the PC's main memory. This
partial download is available in the online mode of individual Managers (e.g. Con-
figuration Manager, Fault & Maintenance Manager). New or modified hardware can
be registered in AMS in this way.
203
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013