Replacing The Front Bumper Bulb - Seat Mii Electric Owner's Manual

Place the bulb, return it to its position and
●
›››
secure the safety step
Place the rubber cover and check that is in
●
the correct position. Insert the connector to
the bulb H4.
Dipped beam light and daytime running
light / Turn signal
B C
Open the bonnet
●

Turn the bulb holder in an anticlockwise
●
direction as far as it will go and remove it,
along with the bulb, pulling backwards.
Remove the bulb from the holder. If neces-
●
sary, press the lock on the bulb holder.
Replace the faulty bulb with a new identical
●
bulb.
Insert the bulb holder in the headlight and
●
turn it clockwise as far as the stop.
Note
The images show the left hand headlight
from behind. The structure of the right hand
side headlight is symmetric.
54

Replacing the front bumper bulb

Fig. 49
D.
Fig. 50
bulb
Fig. 51
Emergencies
Front right wheel arch: access to the
Changing the bulbs in the headlights
Unscrew 2 securing bolts from the wheel
●
›››
arch trim Fig. 50 (arrows) with the screw-
›››
driver in the vehicle tool kit page
Unscrew the expansive rivet in the lower
●
front part of the wheel arch trim
screwdriver from the vehicle tool kit and com-
›››
pletely remove it page 35.
Carefully fold the wheel arch trim to the
●
side.
›››
Release the connector Fig. 51
●
move it.
›››
Turn the bulb holder Fig. 51
●
tion of the arrow, anticlockwise as fas as it
will go and remove it together with the bulb
by pulling it backwards.
Replace the faulty bulb with a new identical
●
bulb.
Insert the bulb holder in the headlight and
●
turn it clockwise as far as the stop.
Plug the connector into the bulb holder.
1
●
The connector must audibly click into place.
Replace the wheel arch trim into its posi-
●
tion.
Place the expansive rivet in the wheel arch
●
trim and bumper and press it completely in-
›››
wards Fig. 50 .
A
Securely tighten the 2 securing bolts
●
›››
Fig. 50
(arrows) with a screwdriver.
35.
with the
A
and re-
1
in the direc-