Starting The Station Update; Requirements For Media Sources And Audio Files; Media Sources And Audio Files - Seat Mii Electric Owner's Manual

Starting the station update

Additional DAB functions
Fig. 122
Active station update.
Fig. 123
During the station update, the equipment
searches for the available station ensembles
in the place where it is located.
In the preset button view, press the function
●
›››
button Fig. 121 to display the additional

›››
functions available Fig. 122.
›››
Press the function button
●

message that the station update is active is
displayed on the top bar of the screen
›››
Fig. 123.
Operating modes
The station update may take a few sec-
●
onds. The station update ends when the indi-
cation disappears.

During radio update the sound of the radio is
suppressed.
Media
Introduction
"Media sources" are audio sources contain-
ing audio files on various different data stor-
age devices (e.g. CD, external MP3 players).
These audio files can be played with their
corresponding applications or the radio's au-
dio inputs.
Note
Do not use memory card adapters.
●
SEAT assumes no liability for any deterio-
●
ration or loss of files on data storage devi-
ces.
Requirements for Media sources
and audio files
Fig. 122, the
Limitations and indications
Dirt, high temperatures and mechanical
damage can cause data media to fail. Con-
sider the indications provided by the manu-
facturer of the data media.
Consider copyright legislation!
The configuration of data media or of the
equipment or programmes used for recording
may cause some titles (tracks) or data media
to be unreadable. On the Internet, for exam-
ple, you can find information regarding the
best way to create audio files or data media
(compression rate, ID3 tag, etc.).
Complex folder structures can slow down da-
ta reading.
Playlists only establish a certain playback
order. The files are not saved in them. Play-
lists cannot be played if the files on the data
media are not saved to the path to which the
playlist refers.
125