Changing The Number Plate Bulbs; Changing The Side Turn Signal Bulb - Seat Mii Electric Owner's Manual

Changing the number plate bulbs

In the rear bumper: remove the plate
Fig. 54
light.
Number plate light: detach the bulb
Fig. 55
holder.
Press the license plate light from left to right
●
with one hand and remove it from the bumper
›››
Fig. 54.
Detach the number plate light carefully
●
from the bumper.
56
Emergencies
Turn the bulb holder with the bulb anti-
●
clockwise and remove it in the direction of
›››
the arrow Fig. 55.
Replace the faulty bulb with a new identical
●
bulb.
Place the bulb holder in the number plate
●
light and press it in the opposite direction
from the arrow as far as it will go
Insert the number plate light carefully into
●
the left edge of the opening on the bumper.
During this process, check that the assembly
direction of the number plate light is correct,
i.e. the spring must be on the right.
Insert the number plate light into the bump-
●
er until it audibly clicks into place.

Changing the side turn signal bulb

Removing the side turn signal
Fig. 56
›››
Fig. 55.
Side turn light: bulb change.
Fig. 57
With one hand move the side turn signal
●
›››
backwards
Remove the side turn signal from the chas-
●
sis by leverage
Remove the bulb holder with the bulb in the
●
direction of the arrow
Remove the bulb holder bulb in a straight
●
direction.
Replace the faulty bulb with a new identical
●
bulb.
Install the bulb holder.
●
Place the side turn signal on the chassis on
●
the side situated towards the rear of the vehi-
cle until the spring clicks into the other side of
the side turn signal.
Fig. 56 .
1
.
2
›››
Fig. 57 .
1