Tp Function; Tp Function Active; Incoming Traffic Announcement (Info); Switching The Tp Function On And Off - Seat Mii Electric Owner's Manual

RDS is not available in all places or on all ra-
dio stations.
Depending on the country and the equip-
ment, RDS and switching to alternative fre-
quencies (AF) can be deactivated in the sys-
›››
tem settings page 117.
TP function (traffic information sta-
tion)
TP function activated.
Fig. 113
The TP function is an RDS radio data service
›››
page 120. If your equipment is fitted with
›››
DAB page 123, you can also use the TP
›››
function without having RDS
Using the TP function to track traffic informa-
tion is only possible if a station providing traf-
fic information can be tuned.
1) This depends on the country and unit in ques-
tion.
Operating modes
If the tracking of a traffic station is active (in-
›››
dication: TP
ments are played directly in Audio mode.
Tracking of traffic stations is not possible in
the AM frequency band
Some stations without their own traffic infor-
mation support the TP function by broad-
casting traffic information from other stations
(EON). Traffic announcements of the corre-
sponding traffic station are played directly
during the active audio mode.

Switching the TP function on and off

Press the
TP
●
If the function is activated in areas where
TP
there is no support for TP, the following
warning will appear on the screen: NO TP .
Press the
TP
●
activate the TP function again.

TP function active

While the traffic station tracking is active and
ready for operation, in the FM mode the
page 121.
›››
Fig. 113 function button is displayed.
In Radio mode the station being listened to
must support the TP function, or there must
be a DAB or EON station available that sup-
Fig. 113) traffic announce-
.
1)
function button.
function button again to de-
TP
ports the TP function. If neither of the require-
ments are met, it is not possible to track the
traffic station.
If the traffic station being listened to can no
longer be tuned, you will have to start a man-
ual search using the arrow buttons
›››
page 120.
If you search for a station using the arrow but-
tons, the NO TP indication appears if the sta-
tion currently tuned is not compatible with TP.
In Media mode or while the equipment vol-
ume has been suppressed (mute), a traffic
station is automatically tuned in the back-
ground, as long as the station has a good sig-
nal. Depending on the situation, this opera-
tion may take some time.

Incoming traffic announcement (INFO)

In Audio mode, traffic announcements are
played directly when they are received.
If necessary, the radio gives way to the traf-
●
fic station (EON) while the announcement is
playing.
Media mode is interrupted and the volume
●
is set as adjusted.
The volume of the traffic announcements
●
can be modified with the volume control
and
 
»
.

121