Fuses And Bulbs; Fitting The Towline Anchorage - Seat Mii Electric Owner's Manual

Hide thumbs Also See for Mii Electric:
Table of Contents

Advertisement

Bear in mind the instructions for towing
›››
page
48.

Fitting the towline anchorage

Remove the towing eye from the vehicle
tool kit in the luggage compartment
›››
page
35.
Remove the cover by pressing down on the
top and leave it hanging from the vehicle
›››
Fig.
42.
Screw the towing eye in the housing by
turning it to the maximum anticlock-
›››
›››
wise
Fig. 43
. Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
After towing, unscrew the towing eye
clockwise with a suitable object.
Replace the cover and press on its lower
part until the tab snaps into the bumper.
Clean the towing eye if necessary and then
store it in the luggage compartment along
with the other vehicle tools.
CAUTION
The towing eye must always be completely
and firmly tightened. Otherwise, it could be
released while towing and tow-starting.
50
Emergencies

Fuses and bulbs

Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
WARNING
The high voltages in the electrical system
can give serious electrical shocks, causing
burns and even death!
Never touch the electrical wiring of the
ignition system.
Take care not to cause short circuits in
the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same am-
perage (same colour and markings) and
size.
Never replace a fuse by a metal strip, sta-
ple or similar.
CAUTION
To prevent damage to the vehicle's electric
system, before replacing a fuse always turn
off the ignition, the lights and all electrical
elements and remove the key from the igni-
tion.
Note
In the vehicle, there are more fuses than
those indicated in this chapter.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents