Fog Lights; Turn Signal Lever And Main Beam Headlight - Seat Mii Electric Owner's Manual

Hide thumbs Also See for Mii Electric:
Table of Contents

Advertisement

Always use your dipped beam head
lights if it is raining or if visibility is poor.
Never drive with daytime lights if the road
is not well lit due to weather or lighting
conditions.
On vehicles with rear lights with bulbs,
when activating the daytime running light
the rear lights are not switched on. A vehi-
cle which does not have the rear lights on
may not be visible to other drivers in the
darkness, in the case of heavy rain or in
conditions of poor visibility.
WARNING
If the headlights are set too high and not
used correctly, there is a risk of dazzling or
distracting other road users. This could re-
sult in a serious accident.
Always make sure that the headlights are
correctly adjusted.
Note
The legal requirements regarding the use
of vehicle lights in each country must be
observed.
The dipped beam headlights will only
work with the ignition on. The side lights
come on automatically when the ignition is
turned off.
82
Operation

Fog lights

Instrument console: light panel.
Fig. 79
The warning lamps
or
also show, on the
light switch or instrument panel, when the
front fog lights are on.
Turning on the front fog lights*
light switch out to its first click position
›››
Fig. 79
, from positions
,
1
Turning on the rear fog light
light switch fully out
from position
2
. This control has only one position in ve-

hicles without fog lights.
To switch off the fog lights, press the light
switch or turn it to position
.
Note
The rear fog light can dazzle drivers behind
you. You should use the rear fog light only
when visibility is very poor.
Turn signal lever and main beam
headlight
Turn signal and main beam lever.
Fig. 80
More the lever to the required position:
Right turn light or right-hand parking light
1
: pull the
(ignition switched off).
Left turn light or left-hand parking light
2
or
.

(ignition switched off).
: pull the
Main beam on: control lamp
3
,
or
the instrument panel.
Light flash: on with the lever pushed. Con-
4
trol lamp
Push the lever all the way down to turn off the
corresponding function.
lit up on
lit up.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents