in slippery circumstances or on flooded
roads.
Never use the CCS when driving off-road
●
or on unpaved roads.
Adapt your speed and the distance to the
●
vehicles ahead in line with visibility, weath-
er, the condition of the road and the traffic
situation.
To avoid unexpected operation of the
●
cruise control system, turn it off every time
you finish using it.
It is dangerous to use a set speed which is
●
too high for other conditions.
If driving down a steep gradient, the GRA
●
cannot maintain a constant speed. The
speed can increase. In this case, reduce
the speed by braking or connecting the
brake energy recuperation.
152
Driving
Operating the speed limiter with
the turn signal lever
On the turn signal lever: controls for
Fig. 140
operating the GRA.
Connecting
›››
Move the control
Fig. 140
●
If no speed has been programmed, the sys-
tem will not control it.
Activating the cruise control
›››
Press button
Fig. 140
in area
2
●
The current speed is stored and the cruise
control is activated.
Temporarily interrupting
›››
Move the control
Fig. 140
●
step on the brake.
The cruise control system is switched off tem-
porarily. The speed is stored.
Reinstating the cruise control
Press button
●
Cruise control is activated at the stored
speed.
Adjusting the speed
While the GRA is set, the stored speed can be
adjusted with button
To increase in increments of 1 km/h (1 mph)
●
briefly press button
.
To increase the speed without interruption,
●
›››
keep button
to
.
1
the area
To reduce in increments of 1 km/h (1 mph)
●
briefly press button
.
To decrease the speed without interruption,
●
.
›››
keep button
the area
The vehicle adapts the current speed by ac-
celerating or stopping accelerating. The vehi-
cle does not brake actively.
to
or
1
Switching off
Move control
●
›››
Fig. 140
in area
.
2
›››
Fig. 140
:
2
›››
Fig. 140
in the area
2
Fig. 140
pressed down in
2
.
›››
Fig. 140
in the area
2
Fig. 140
pressed down in
2
.
›››
Fig. 140
to
.
1