Figure 12-15 Carrier Camming Lever - Silicon Graphics SGI Altix 3700 Bx2 User Manual

12: Maintenance and Upgrade Procedures
152
6. Gently slide the carrier all the way into the enclosure until it is stopped by the
camming lever on the right of the carrier, as shown in Figure 12-15.
TP900 Storage Module
Figure 12-15 Carrier Camming Lever
7. Push the carrier handle into place—the camming foot on the base of the carrier will
engage in a slot in the enclosure. Continue to push firmly until the handle fully
engages. You should hear a click as the latch engages and holds the handle closed.
007-4377-002