L1 Mode From L2 Emulation - Silicon Graphics SGI Altix 3700 Bx2 User Manual

2: System Control

L1 Mode from L2 Emulation

42
In L1 mode, the prompt from a single L1 is visible, and all input is directed to that L1
command processor.
To enter L1 mode, enter the rack and a slot followed by l1:
L2> r 2 s 1 l1
enterling L1 mode 001c05, <CTRL-T> to escape to L2
001c05-L1>
To return to L2 emulation mode, press Ctrl+T:
001c05-L1> Ctrl+T
escaping to L2 system controller, <CTRL-T> to send escape to L1
L2>
At this point, you can enter any L2 command. Once the command is executed, the L2
emulator returns to L1 mode:
re-entering L1 mode 002c01, <CTRL-T> to escape to L2
001c05-L1>
To permanently engage the L2 emulation mode, press Ctrl+T and enter the l2
command:
002c01-L1> Ctrl+T
escaping to L2 system controller, <CTRL-T> to send escape to L1
L2> l2
L2 command processor engaged, <CTRL-T> for console mode.
L2>
007-4377-002