Protocol Settings; Figure 4-21. Example Of Dispensing With Selected Wells - Thermo Scientific Multidrop Combi nL User Manual

Routine Operation

Protocol settings

Protocol settings
42
Thermo Scientific Multidrop Combi nL User Manual
Figure 4–21. Example of dispensing with selected wells
This section describes the additional parameters that supplement the
plate type you have selected. These additional parameters are set in the
Settings menu. The values shown in the Settings menu are those set for
the plate type that is selected in the Main menu.
Note The protocol settings do not normally have to be changed in
routine use.
s
Note An exclamation mark will appear in the menu tab and in the
circle on the main view row in question when the setting differs from
the default setting.
s
The changes made to the protocol settings only remain in the
instrument memory if the protocol is saved with a name (see "Save and
edit protocol" on page 51). If the protocol is not saved, the changes
only remain effective until the plate type is changed or the instrument is
switched off.
Thermo Fisher Scientific