Figure 3-9. Removing The Red Luer Plugs; Figure 3-10. Connecting The Hosing To The Pressure/Vacuum System - Thermo Scientific Multidrop Combi nL User Manual

Thermo Fisher Scientific
1. Remove the luer plugs from the left side of the pressure/vacuum
red
system box and from the reagent reservoir (Figure 3–9). The red
luer plugs avoid particles from entering the pressure/vacuum system
unnecessarily.
Figure 3–9. Removing the red luer plugs
2. Connect the luer connector of the hosing to the pressure/vacuum
system box (Figure 3–10). Connect the other end of the hosing
through a similar luer connector to the reagent reservoir
(Figure 3–11) for producing pressure and vacuum.
Figure 3–10. Connecting the hosing to the pressure/vacuum system
Thermo Scientific Multidrop Combi nL User Manual
Installation
Installation setups
21