Chapter 5 Maintenance; Maintenance Checklist; Table 5-6. Maintenance Checklist - Thermo Scientific Multidrop Combi nL User Manual

Maintenance
checklist
Thermo Fisher Scientific
Chapter 5
Maintenance
This chapter on maintenance contains an outline of the
tasks/procedures mentioned in the checklist below (Table 5–6).
Contact local authorized technical service or your local Thermo Fisher
Scientific representative for assistance, if necessary.
Table 5–6. Maintenance checklist
Procedure
Keep the instrument free of dust. See "Regular and preventive
maintenance" on page 68.
Wipe away spilled saline solutions, solvents, acids or alkaline solutions
from outer surfaces immediately to prevent damage, and wipe with
deionized distilled water. See "Regular and preventive maintenance" on
page 68.
If any surfaces have been contaminated with biohazardous material,
disinfect with a mild sterilizing solution. See "Regular and preventive
maintenance" on page 68.
Clean the case of the instrument and the dispensing area periodically.
See "Regular and preventive maintenance" on page 68.
Clean the tubings when necessary. See "How to clean the tubings" on
page 69.
Clean the reagent reservoir when necessary. See "How to clean the
reagent reservoir" on page 78.
Clean the plate carrier when necessary. See "How to clean the plate
carrier" on page 79.
Clean the priming vessel when necessary. See "How to clean the
priming vessel" on page 79.
Maintain the dispensing valves daily. See "Daily maintenance" on page
72.
Maintain the dispensing valves periodically. See "Daily maintenance"
on page 72.
Clean the leaking or clogged dispensing valves (tips) when necessary.
See "How to clean a leaking dispensing valve" on page 73 and "How to
clean a clogged dispensing valve" on page 75.
Replace the dispensing valve when necessary*. See "Replacing a
dispensing valve" on page 75.
Continued






Thermo Scientific Multidrop Combi nL User Manual





67