Dispensing Volume And Liquid - Thermo Scientific Multidrop Combi nL User Manual

Routine Operation
Dispensing parameters
Dispensing volume
36
Thermo Scientific Multidrop Combi nL User Manual
Go to the Main menu. Select the Volume and Liquid row.
and liquid
Press
OK
shown.
Select the dispensing volume (Volume) using the Up and Down arrow
keys. You can speed up the selection by holding down the arrow key
continuously.
Then select Liquid (Calibration) using the Left and Right arrow keys.
The different liquids set are:
Water
l
1% BSA (bovine serum albumin)
l
30% glycerol
l
DMSO (dimethyl sulfoxide)
l
Methanol
l
If you have a different liquid than the five liquids mentioned above, you
can calibrate the new liquid with FILLit Software or use the liquid
factor to calibrate the set volume.
The optimal speed, dispensing volume range and the liquid factor for
the dispensed liquid are displayed in the Volume and Liquid window.
. The default dispensing volume for the selected plate type is
Thermo Fisher Scientific