Display; Figure 4-20. Main View On The Display Of The Multidrop Combi Nl - Thermo Scientific Multidrop Combi nL User Manual

Routine Operation
Control panel
30
Thermo Scientific Multidrop Combi nL User Manual
The
STOP
Note In addition, the
"Cancel" button.
The
PRIME
and predispense.
Predispenses as long as you press the button.
The
EMPTY
dispensing valves into the liquid reservoir (backflush option).
The
EMPTY
tubes. Refer to Chapter 5: "Maintenance".
Empties as long as you press the button.
The
SHAKE
started by pressing the
button.
STOP
The
PRESSURE
pressure has been reached, pressing the
the pressure. Therefore, you can toggle with the
However, raising the pressure is started by pressing the
button and stopped only by pressing the
has not yet been reached.
Note Pushing in the protective cover releases the pressure.
The
TIP WASH
hosing/microsolenoid valves and to open clogged dispensing valves.
The tip washing is started by pressing the
comes in pulses and one channel at a time to maintain a maximum
flow through the dispensing valve.
Tip washes as long as you press the button.

Display

The main view in the display is shown in Figure 4–20.
Icon
Figure 4–20. Main view on the display of the Multidrop Combi nL
button is also used to stop the shaking action.
button is used as an "Esc" (Escape)/
STOP
s
button is used to fill the tubings of the dispensing valves
button is used to empty the liquid from the tubings and
button is also used for cleaning the dispensing valves and
button is used to shake the plate linearly. The shaking is
button and stopped by pressing the
SHAKE
button is used to raise the pressure at startup. Once the
button is used to remove persistent air bubbles from the
button again releases
PRESSURE
button.
PRESSURE
PRESSURE
button if the pressure
STOP
s
button. The liquid
TIP WASH
Menu
Main view row
Info text bar
Thermo Fisher Scientific