Table of Contents
Advertisement
Chapter 5
Running a protocol
Software User Guide
Refer to the Multidrop Pico dispenser
for
information about initiating and completing a protocol run.
Run/Simulation
Window layout –
In this phase of the run, you load the plate, cassette, and fluids as
prompted.
plate and fluid
preparation
Initially, you will be prompted for both plate and cassette load. Plate
and cassette load regions will be displayed as needed during the run.
In simulation mode the Simulation Speed bar is displayed. Use the bar
to adjust the progress speed of the dynamic display of fluids as they are
being dispensed. You can adjust the simulation speed at any time
during the simulated run.
Fluid dispensing begins when the plate and cassette are loaded and one
of the fluid reservoirs has been filled for dispensing.
.
Status area
The upper portion shows a "status" display area, indicating Waiting on
Operator for plate and fluid preparation. There is also a progress circle
that lets you know how far along the protocol run is.
Thermo Fisher Scientific
Thermo Scientific™ Multidrop™ Pico 8 Digital Dispense
16
Advertisement
Table of Contents
