Dispensing - Thermo Scientific Multidrop Combi nL User Manual

Dispensing

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Thermo Fisher Scientific
You can immediately start dispensing by following the quick start
guidelines below. Routine dispensing only requires to key in a few
buttons.
Power ON the instrument.
Insert the priming vessel and install the reagent reservoir and the
reagent. Close the protective cover.
Make sure you are in the Main menu.
Select the plate type and insert the plate.
Select the dispensing volume and the liquid.
Press the button and wait till the pressure has risen.
PRESSURE
Only at startup!
Keep the button down until the tubings are completely filled.
PRIME
Press the button to start the protocol. The instrument dispenses
START
the plate.
Press the button to empty the dispensing tubing.
EMPTY
Power OFF the instrument. The pressure will be released.
Thermo Scientific Multidrop Combi nL User Manual
Routine Operation
Dispensing
33