Table of Contents
Advertisement
INSTALLATION AND OPERATION
WJ-8718-19/FE HF RECEIVER
Example 21:
Initiate a Sector B scan with the receiver parameters set as
follows:
AM mode, FAST AGC, 6 kHz IF bandwidth, Threshold
level of 5.
[AM] [FAST] [6]
(1) Desired receiver parameter entry.
[5] [THRS]
(2) Threshold level set to 5.
"5"
displayed in BFO OFS/THRS LVL
display window.
[1] £9]
(3) Data entry; "19" displayed in
FREQUENCYoMHZ display window.
[AUTOSCAN]
(4)
Termination command; receiver
scans Sector B; "19" displayed in
MEM ADRS display window
2.4.6.3.2 Sector Scan/Receiver Register Data Source - Fl or F2 Channel
The receiver register data stored with each sector's f. and f0 fr^mi^nn\^
rcan be utilized to set the receiver parameters prior to initiating a sector scan
This
feature provides the capability to store two sets of receiver register data for each
scan sectom
The following procedure recalls receiver register data from a sector f, or
andf?3Qsn^^^^^
%%^eT *Sector sc*n in that sector. Examples 22
o
Sector Scan Command Sequence - Procedure 2
1)
Enter designated channel number (17 or 18 for Sector
A, 19 or 20 for Sector B).
2)
Terminate recall command by pressing RCL termination
switch.
3)
Terminate command sequences by pressing AUTO SCAN
termination switch.
2-30
Advertisement
Chapters
Table of Contents
