Table of Contents
Advertisement
n o ~ o i J. u — a «?/ A
*j
n *
i w u ^ ^ i j * t
j_i,
moinbortiiun
/iixu UftKAllUN
Example 14:
Add channel 14 to previously established scan of channels 1 to 3.
[1]
[4]
[LOCKOUT] [LOCKOUT]
(1)
Data, entry; "14" displayed in
FREQUENCY/MHZ display window.
(2)
Termination command; pressing
AUTO
SCAN
results
in
receiver
scanning channels 1,2,3 and 14.
Example 15:
Add channels 4 to 9 to previously established scan of channels 1 to 3,
[4]
[.]
[9]
[LOCKOUTS LOCKOUT]
(1)
Data entry; "4c9" displayed in
FREQUENCY/MHZ display window.
(2)
Termination command; pressing
AUTO
SCAN
results
in
receiver
scanning channels 1 to 9.
The following procedure returns all locked out channels to the scan.
o
All Channel Scan - Procedure
1)
Enter 0 on keypad.
2)
Terminate command by pressing LOCK OUT termination
switch twice.
Example 16 shows how the above procedure can be utilized to establish a
scan of all but a few memory channels.
Example 16:
Establish scan of all memory channels except 5 and 6.
[0]
[LOCKOUT] [LOCKOUT]
[5]
[.]
[6]
[LOCKOUT]
(1)
Data entry; "0" displayed in
FREQUENCY/MHZ display window.
(2)
Termination command; all locked
out channels are returned to the
scan.
(3)
Data entry; "5c6" displayed in
FREQUENCY/MHZ display window.
(4)
Termination command! channels 5
and 6 are locked out of scan.
2-25
Advertisement
Chapters
Table of Contents
