Watkins-Johnson Company WJ-8718-19/FE Instruction Manual page 42

n o - o u o - i a / r c o r n c u L n c a
INSTALLATION AND OPERATION
Example 5: Store present receiver parameters in memory channel 15
[1] [5]
[STO]
(1) Data, entry; "15" displayed in
FREQUENCYoMHZ display window.
(2) Termination command; present
receiver parameters stored in
channel 15; "15" displayed in MEM
ADRS display window.
The following procedure recalls the parameters stored in one of the
numbered memory channels and sets the receiver to those parameters. Example 6
shows a typical memory recall commandn
o Recall Memory - Procedure
1) Enter designated channel number on keypad.
2) Terminate command by pressing RCL termination
switch.
Example 6: Set receiver to the parameters stored in memory channel 49.
[4] [9]
[RCL]
(1) Data entry; "49" displayed in
FREQUENCYoMHZ display window.
(2) Termination command; receiver
parameters set to those stored in
memory channel 49; front panel
indicators and displays reflect
updated parameters; "49" displayed
in MEM ADRS display window.
The following procedure updates one or more individual parameters in a
designated numbered memory channel. Example 7 shows a typical memory update
command sequence.
o Update Memory - Procedure
1) Enter designated channel number on keypad.
2) Terminate recall command by pressing RECALL
termination switch.
3) Update desired individual parameters.
4) Enter designated channel number on keypad.
5) Terminate command by pressing STORE termination
switch.
2-17