Timer Operation; Interval Timer Operation; Stopwatch Timer Operation - Labconco Logic+ 30348 Series User Manual

Timer Operation

The timer button allows activation of an interval (countdown) or elapsed
(stopwatch) timer. The timers cannot be operated simultaneously.
To access the timer menu, press
the Home Screen). The main timer menu is displayed (Fig. 5-8a). Select
Stopwatch Timer, then [OK/MUTE].
Stopwatch

Interval Timer Operation

1. The interval timer defaults to 05:00 (minutes:seconds).
2. Press [UP] or
3. When the proper interval is selected, press
4. When the timer reaches 00:00, an audible alarm will sound, and the timer
will reset itself and repeat the countdown.
5. Press [OK/Mute]
the timer will reset to the previously selected interval.
6. Press [Menu]

Stopwatch Timer Operation

1. The stopwatch timer defaults to 00:00.
2. Press [OK/Mute]
3. Press [OK/Mute]
and the timer will reset to 00:00.
4. Press [Menu]
5: Using The Cabinet
[Timer]
[DOWN] to increase or decrease the timer interval.
to pause the timer. Press
to clear the interval timer and return to the main timer menu.
to start the timer.
again to pause the timer. Press
to return to the main timer menu.
anytime during normal operation (from
Figure 5-8a
[OK/Mute]
[OK/Mute]
[OK/Mute]
Interval or
Interval
to start the timer.
while paused, and
while paused,
43