Labconco Logic+ 30348 Series User Manual page 46

Final Purging
 Upon completion of work, the cabinet should be allowed to operate for two
to three minutes undisturbed, to purge airborne contaminants from the work
area
Unloading Materials and Equipment
 Objects in contact with contaminated material should be surface
decontaminated before removal from the cabinet
 All open trays or containers should be covered before being removed from
the cabinet
Wipe-Down
 Wipe down the interior surfaces of the cabinet with a suitable disinfectant,
or 70% ethanol, and allowed to dry
 Periodically lift the work surface and wipe down the area beneath it
 Inspect and clean the towel catch located at the rear of the work area,
beneath the work surface
 Dispose of rubber gloves appropriately, and have lab coat laundered
properly
 Wash hands and arms thoroughly with germicidal soap
Shutdown
 Lower the sash to turn off the light and cabinet blower and activate the UV
light if appropriate
5: Using The Cabinet
46