3: Getting Started - Labconco Logic+ 30348 Series User Manual

3: Getting Started

Now that the installation is properly prepared, you are ready to inspect, install, and
certify the Logic+ Biosafety Cabinet. This Section covers how to:
 Unpack and move the cabinet
 Install the cabinet
 Connect the electrical supply source
 Connect the service lines
 Connect to an exhaust system (optional)
 Arrange certification of the cabinet
Tools required for installation of the cabinet include two 1/2" wrenches, a flat-blade
screwdriver, a #2 Phillips screwdriver, and a carpenter's level.
Note: The cabinet models weigh between 400–700 lbs. (182-318 kg). The
shipping pallet allows for lifting with a mechanical lift truck or floor jack. If you must
lift the product manually, use at least six (6) persons and follow safe-lifting
guidelines.
13