Installation; Inspect Shipping Contents - Ametek Thermox 2000 ATEX Series User Manual

!
WARNING
This chapter shows you how to install your sensor components, and in-
cludes the following sections:
•

Inspect Shipping Contents

• Mechanical Installation
• Wiring
• Series 2000 Control Unit Option Card Installation
Inspect Shipping Contents
Remove any packing material from the sensor and check for damage. If
any is found, notify the shipper.

INSTALLATION

The operations in this chapter should only be performed by qualified
service personnel experienced with electrical safety techniques. There
are no operator serviceable components inside the WDG-HPII/HPIIC
system. Never service the sensor unless power has been removed and
it has been allowed to cool for at least one hour. Also, always use
gloves when working on the sensor.
|
Installation 3-1