Ametek Thermox 2000 ATEX Series User Manual page 184

Location
(Hex/Decimal) Variable Name
5D/93 Alr1_flg
5E/94 Alm_config
Alm_config
A-22 | Thermox Series 2000 WDG-HPII / HPIIC - ATEX
Description
What process alarm is associated with
S2
0 – oxygen
oxygen, combustibles, or methane
1 – calibration
2 – verify
3 – in cal/verify
IQ
Configuration for oxygen alarms, high
or low. If a bit is 1, that is the
condition that the indicated alarm
will trip on.
bit 0 – high oxygen, process alarm
bit 1 – low oxygen, process alarm
bit 2 – high combustible, process
IQ
alarm
bit 3 – high methane, process alarm
bit 4 – high oxygen, alarm #2
bit 5 – low oxygen, alarm #2
bit 6 – high combustible, alarm #2
bit 7 – high methane, alarm #2
bit 8 – high oxygen, alarm #3
bit 9 – low oxygen, alarm #3
bit 10 – high combustible, alarm #3
bit 11 – high methane, alarm #3
bit 12 – Future use
bit 13 –Future use
bit 14 – Future use
bit 15 – Future use
S2
Configuration for oxygen alarms, high
or low. If a bit is 1, that is the
condition that the indicated alarm
will trip on.
bit 0 – Future use
bit 1 – Future use
bit 2 – Future use
bit 3 – Future use
bit 4 – Future use
bit 5 –Future use
bit 6 – Oxygen Alarm #3. 0=Low, 1=High
bit 7 – Oxygen Alarm #4. 0=Low, 1=High
bit 8 – Future use
bit 9 – Future use
bit 10 – Future use
bit 11 – Future use
bit 12 – Future use
bit 13 – Future use
bit 14 – Future use
bit 15 – Future use
Access
R/W
IQ
R/W
IQ
IQ
IQ
IQ
IQ
IQ
IQ
IQ
IQ
IQ
IQ
R/W