Ametek Thermox 2000 ATEX Series User Manual page 9

Manufacturer's Name:
Manufacturer's Address:
declares that the products:
Thermox WDG "ATEX" Series of Flue Gas Analyzers using Series 2000 Controller:
Product Names:
WDG-IV
WDG-HPIIC
O2 Only RCU
Conform to the following standards:
EMC compliance:
EMC Directive 2004/108/EC
Immunity:
EN 50082-2:1995 Generic - Heavy Industrial Equipment
EN 50082-1:1997 Generic - Residential, Commercial, Light Industrial Equipment
EN 61000-6-2:1999 Generic - Heavy Industrial Equipment
EN 61326:1997
Emissions:
EN 55011:1998
ATEX Directive 94/9/EC
Examination in accordance with standards:
EN 13980 Potentially Explosive Atmospheres – Application of Quality Systems
EN 50014 (IEC 60079-0) Electrical Apparatus for Potentially Explosive Atmospheres - General
Requirements
EN 50016 (IEC 60079-2) Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized
Apparatus "p" (sensors)
EN 50021 (IEC 60079-15) Electrical Apparatus for Potentially Explosive Atmospheres - Type of
Protection "n" (controls)
For which LCIE (0081) notification LCIE 03 ATEX Q 8022
And EC Examination Certificate LCIE 05 ATEX 6140 X were issued
Electrical Safety Compliance:
UL 3101-1
CAN/CSA 22.2 No. 1010.1-92
EN61010-1:1993,
Amendment A2: 1995
Series 2000 Controller also has the following safety compliance:
UL 1604
WDG Series analyzers with the suffix Div. 2, O2 Only RCU, O2 & Comb RCU, and O2, Combustibles &
Methane RCU also conform to the following safety standard:
UL 1604
Manufacturer's Address in Europe:
AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Strasse 16
D-40670 Meerbusch, Germany
July 2005
Declaration of Conformity
AMETEK Process Instruments
150 Freeport Road
Pittsburgh, PA 15238
WDG-IVC
WDG-UOP/RP
O2 & Comb RCU
Measuring Equipment (Heavy Industrial)
Class A, ISM Equipment
UL Listed Inspection and Measuring Electrical Equipment
cUL Listed Inspection and Measuring Electrical Equipment
Electrical Equipment for Measurement, Controls,
and Laboratory Use
UL Listed Process Control Equipment for Use in Hazardous Location
UL Listed Process Control Equipment for Use in Hazardous Locations
WDG-IVCM WDG-HPII
WDG-UOP/RP HP
O2, Combustibles & Methane RCU
Compliance Engineer
Mark Coppler
Contents | ix