Calibration - Ametek Thermox 2000 ATEX Series User Manual

Figure 5-1.
Calibrate Key menu
options.

CALIBRATION

Initiate Cal
Cal/Verify Data
Inject Cal Gas
Set K Factor
The Calibrate key allows you to use the Series 2000 control unit to
calibrate your analyzer. The Series 2000 control unit provides features
that make calibrating your analyzer easy, and even includes a way for the
system to periodically calibrate itself.
Sensor alarms are disabled during calibrations and the recovery
time after a calibration. You can set whether analog outputs should
NOTE
follow the calibration readings or hold at the last process reading
before the calibration.
Calibrate Key
Initiate Verify
Cal Gas Value
Set Cal Timers
Sensitivity
Calibration | 5-1