Table of Contents
Advertisement
Demanding applications may even require a higher current than is available as standard on the different
models of PMC potentiostats. The PMC BOOSTER is available in two different versions – the PMC
BOOSTER 5A and PMC BOOSTER 10A.
SINGLE BOOSTER, PMC BOOSTER5A or PMC BOOSTER 10A
INSTALLATION
The PMC BOOSTER (PMC BOOSTER5A and PMC BOOSTER10A) both install into the PMC Chassis (P/N
PMC CHS08A). No tools are required for this installation. It is recommended to turn power off to the
chassis before installation of the PMC Booster. The booster occupies 2 slots of the chassis. The cable
lengths are sufficient that the BOOSTER does not have to be installed into the slot adjacent to its
associated PMC Channel.
After using the guides to slide the PMC BOOSTER into the chassis, tighten the 4 thumbscrews to figure-
tight levels.
Advertisement
Table of Contents
