Ametek Thermox 2000 ATEX Series User Manual page 80

Watchdog Timer
Serial output
Read Memory Location
1.
2.
3.
4-12 | Thermox Series 2000 WDG-HPII / HPIIC - ATEX
Allows you to test that the watchdog timer and alarm circuit is
working properly. (See the "Watchdog Timer" section at the end of
Chapter 7 for more information on the watchdog timer).
Sends the string "Test Message" through the serial port until stopped
by the user. This is used to test communication settings and wiring.
This is used to view internal software variables used for system
operation and troubleshooting.
System Serial #
This menu option allows you to view your system serial # and manufac-
turing #. You may be asked by AMETEK/Thermox personnel to provide
this information upon request.
Setting up the serial number
Select System Serial # from the Setup menu.
Select System Serial # or Manufacturing #.
The system displays the system serial # or manufacturing #.