3.10. UART Interfaces
The module provides three UART interfaces: main UART interface, debug UART interface, and BT UART
interface. Features of these interfaces are shown as below:
Main UART interface supports 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps
(default), 230400bps, 460800bps, and 921600bps baud rates. It is used for data transmission and AT
command communication. And it supports RTS and CTS hardware flow control.
Debug UART interface supports 115200bps baud rate. It is used for Linux console and log output.
BT UART interface supports 115200bps baud rate. It is used for BT communication and can be
multiplexed into SPI interface*.
NOTE
"*" means under development.
3.10.1. Main UART Interface
The following table shows the main UART interface pin definition.
Table 12: Pin Definition of Main UART Interface
Pin Name
Pin No.
CTS
56
RTS
57
RXD
58
DCD
59
TXD
60
RI
61
DTR
62
EG18_Hardware_Design
I/O
Description
DO
Clear to send
DI
Request to send
DI
Receive data
DO
Data carrier detection
DO
Transmit data
DO
Ring indication
Data terminal ready,
DI
sleep mode control
LTE-A Module Series
EG18 Hardware Design
Comment
1.8V power domain
1.8V power domain
1.8V power domain
1.8V power domain
1.8V power domain
1.8V power domain
1.8V power domain
50 / 104