Auto Control Panel: Info View - Kemppi X5 FastMig Series Operating Manual

Post gas
Current
MMA welding parameters
The parameters listed here are available for adjustment with the MMA process.
Parameter
Dynamics
Hot start level (MMA)
Current
Gouging parameters
The parameters listed here are available for adjustment with the gouging process.
Parameter
Current

3.3.5 Auto control panel: Info view

The Info view shows information on the device usage. Through this view it is also possible to access the error logs,
list of installed welding programs, additional operating information and device info, such as the software version
and equipment serial numbers.
© Kemppi
0.0 ... 9.9 s, step 0.1
0.0 = OFF
10 ... machine size A, step 1
Default = 50 A
Parameter value
-10.0 ... +10.0, step 0.2
Default = 0
-30 ... +30
Default = 0
10 ... machine size A, step 1
Default = 50 A
Parameter value
10 ... machine size A, step 1
Default = 50 A
76
Operating manual - EN
Welding function that continues the shield-
ing gas flow after the arc has extinguished.
This ensures that the hot weld does not
come into contact with air after the arc is
extinguished, protecting the weld and also
the electrode. Used for all metals. Especially
stainless steel and titanium require longer
post gas times.
Welding current adjustment.
Description
Controls the short circuit behavior of the
arc. The lower the value the softer the arc,
the higher the value the rougher the arc.
Welding function that uses higher or lower
wire feed speed and welding current at the
start of the weld. After the Hot start period
the current changes to normal welding cur-
rent level. This facilitates the start of the
weld especially with aluminum materials. In
MMA the Hot start level is preset by the
user.
Welding current adjustment.
Description
Current adjustment.
X5 FastMig
1920960 / 2039