This operating manual contains important information on the use, maintenance and safety of your Kemppi product. The technical specifications of the equipment can be found at the end of the manual. Please read the operating manual and the safety instructions booklet carefully before using the equipment for the first time.
Control panel Remote control connector Sub-feeder sync connector (kit optional) Gun water connections (cooling optional) Euro gun connector Shielding gas connection Connection for control cable Welding current cable connector Lead-in and clamping of cooling liquid hoses FastMig MXF 63, 65, 67...
5. Mounting FastMig wire feed units to boom and swing arms When mounting wire feed units to boom and swing arms, the unit must be electrically isolated from both. Suspension angle of wire feed unit can be changed by moving the fixing point in handle. FastMig MXF 63, 65, 67...
Distance wire feeding is accommodated with WeldSnake and SuperSnake products in either air or liquid cooled models. Thermal and load protection is also designed to some Kemppi Gun models and feed units, so carefully consider your requirements and consult your local Kemppi sales team to ensure you choose the correct alternative for your needs.
Steel spiral liners carry the same colour coding as Kemppi machine feed rolls and drive rolls, making wire size, liner and drive roll matching easier if the gun is connected to Kemppi equipment. Steel spiral liners are suitable for welding solid and cored filler wires of corresponding wire diameter.
Remember to close gas bottle valve after welding. Parts of gas flow regulator Gas bottle valve Flow regulation screw Connecting nut Hose tail Hose tail nut Gas bottle pressure gauge Shielding gas flow meter FastMig MXF 63, 65, 67...
SF 53W and SF 54 or SF 51 and SF 52W panels enable compatibility with FastMig KMS power sources. MR 200, MR 300, MS 200 and MS 300 panels are compatible with FastMig M power sources. FastMig MXF 63, 65, 67...
If you have a specific need beyond your standard equipment profile, check Kemppi DataStore for new welding software options or discuss with your supplier. FastMig Pulse is designed to allow customer specified welding software choice. Following delivery and installation your machine will include welding software specified at the point of order.
Page 20
CrNiMo 19 12 Ar+2%CO₂ 1-MIG CrNiMo 19 12 Ar+2%CO₂ 1-MIG FC-CrNiMo 19 12 Ar+15–25%CO₂ 1-MIG More welding programs are available by purchasing MatchCurve and MatchCustom products. You can also order welding program packs together with WiseFusion function. FastMig MXF 63, 65, 67...
Gas test will proceed after time adjustment is complete (short delay). Gas test can be stopped by pressing any button. (Gas test can also be started by pressing the Gas Test button inside the wire spool cabinet.) FastMig MXF 63, 65, 67...
Adjustments can be made before or during the arc process. This control also adjusts additional parameter values when selected. 5.2.11 Arc length/voltage/adjustment control knob Arc length, voltage and parameter adjustments can be made using this knob. Adjustments can be made before or during welding. FastMig MXF 63, 65, 67...
16. Manual control/remote control unit selection *) Minilog is not included in standard delivery **) Wise products are available as optional welding process solutions. Not included in the standard delivery. Please visit www.kemppi.com or Kemppi Datastore. FastMig MXF 63, 65, 67...
**) Wise products are available as optional welding process solutions. Not included in the standard delivery. Please visit www.kemppi.com or Kemppi Datastore. With MS 200 and MS 300 panels 'Wire Inch' and 'Gas Test' buttons should be used from inside NOTE! the wire feed unit.
Adjustment of MIG dynamics c) Adjustment of SETUP parameters 11. Manual control/remote control unit selection With MR 200 and MR 300 panels 'Wire Inch' and 'Gas Test' buttons should be used from NOTE! inside the wire feed unit. FastMig MXF 63, 65, 67...
The owner of the equipment is obliged to deliver a decommissioned unit to a regional collection centre, per the instructions of local authorities or a Kemppi representative. By applying this European Directive you will improve the environment and human health.
Page 33
6254206S12 WS 42 W Ss 1.0 mm 6254208S10 WS 42 W Ss 1.2 mm 6254208S12 For a complete list of welding guns, please visit Kemppi website at www.kemppi.com. Interconnection cable 1.8 m 6260401 Interconnection cable 6260405 Interconnection cable 10 m...
Page 36
KEMPPI OY KEMPPI, TRADING (BEIJING) COMPANY LTD Telefax +44 (0)845 6444202 Kempinkatu 1 sales.uk@kemppi.com Unit 105, 1/F, Building #1, PL 13 No. 26 Xihuan South Rd., KEMPPI FRANCE S.A.S. FIN-15801 LAHTI Beijing Economic-Technological Development 65 Avenue de la Couronne des Prés...