1.5 X5 Auto control panel (X5 FP 300)
This section describes the controls and features of the X5 Wire Feeder 300 Auto control panel (TFT/LCD).
1.
Left control knob (with push button function)
2.
Right control knob (with push button function)
3.
Memory channel selection (shortcut button)
4.
View selection (shortcut button)
5.
Welding parameters view (shortcut button).
For using the control panel, refer to "Using X5 Auto control panel" on page 68.
© Kemppi
15
X5 FastMig
Operating manual - EN
1920960 / 2039