Storage - AUMA SAEx Series Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
ACExC 01.2 Non-Intrusive Profinet
3.2.

Storage

Long-term storage
SAREx 16.2 Control unit: electronic (MWG)
Table 7:
Weights for output drive type
Type designation
A 07.2
A 10.2
A 14.2
A 16.2
Table 8:
Weights for output drive type
Type designation
AF 07.2
AF 07.6
AF 10.2
AF 14.2
AF 16.2
Danger of corrosion due to inappropriate storage!
Store in a well-ventilated, dry room.
Protect against floor dampness by storage on a shelf or on a wooden pallet.
Cover to protect against dust and dirt.
Apply suitable corrosion protection agent to uncoated surfaces.
Risk of damage due to excessively low temperatures!
Actuator controls may only be stored permanently down to 30 °C.
On request, actuators controls may be transported in specific cases and for
short duration at temperatures down to 60 °C.
For long-term storage (more than 6 months), observe the following points:
1. Prior to storage:
Protect uncoated surfaces, in particular the output drive parts and mounting
surface, with long-term corrosion protection agent.
2. At an interval of approx. 6 months:
Check for corrosion. If first signs of corrosion show, apply new corrosion protec-
tion.
Flange size
F07
F10
F10
F14
F16
Flange size
F10
F10
F10
F14
F16
Transport and storage
[kg]
1.1
1.3
2.8
6.8
11.7
[kg]
5.2
5.2
5.5
13.7
23
15