Transport and storage
4.1 Transport
DANGER
4.2 Storage
NOTICE
Long-term storage For long-term storage (more than 6 months), observe the following points:
12
4 Transport and storage
Suspended load!
Death or serious injury.
à Do NOT stand below suspended load.
à Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
à Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting by
hoist to valve and NOT to actuator.
à Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
à Respect total weight of combination (actuator, gearbox, valve)
à Secure load against falling down, sliding or tilting.
à Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Danger of corrosion due to inappropriate storage!
à Store in a well-ventilated, dry room.
à Protect against floor dampness by storage on a shelf or on a wooden pallet.
à Cover to protect against dust and dirt.
à Apply suitable corrosion protection agent to uncoated surfaces.
1. Prior to storage: Protect uncoated surfaces, in particular output drive parts and
mounting surfaces using long-term corrosion protection agents.
2. At an interval of approx. 6 months: Check uncoated surfaces for corrosion. Should
traces of corrosion be detected, renew the corrosion protection.