SV 05.1
SV 07.1
with actuator controls MEC 03.1
4.
Transport and storage
4.1.
Transport
4.2.
Storage
Long-term storage
For transport to place of installation, use sturdy packaging.
Suspended load!
Risk of death or serious injury.
Do NOT stand below suspended load.
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
Risk of corrosion due to inappropriate storage!
Store in a well-ventilated, dry room.
Protect against floor dampness by storage on a shelf or on a wooden pallet.
Cover to protect against dust and dirt.
Apply suitable corrosion protection agent to uncoated surfaces.
For long-term storage (more than 6 months), observe the following points:
1.
Prior to storage:
Protect uncoated surfaces, in particular the output drive parts and mounting
surface, with long-term corrosion protection agent.
2.
At an interval of approx. 6 months:
Check for corrosion. If first signs of corrosion show, apply new corrosion protec-
tion.
Plastic protective caps supplied when leaving the factory are for transport protection
only. They have to be replaced for long-term storage. (Heed protection type indicated
on name plate.)
Transport and storage
9