Accessories For Assembly; Stem Protection Tube For Rising Valve Stem - AUMA SAEx Series Operation Instructions Manual

Assembly
4.5.

Accessories for assembly

4.5.1.

Stem protection tube for rising valve stem

Procedure
22
SAEx 07.2 SAEx 16.2 / SAREx 07.2
6. Fasten screws crosswise to a torque according to table.
Table 11:
Tightening torques for screws
Threads
M6
M8
M10
M12
M16
M20
Figure 15: Assembly of the stem protection tube
[1] Protective cap for stem protection tube (fitted)
[1]* Option: Protective cap made of steel (screwed)
[2] Stem protection tube
[3] V-seal
1. Seal all threads with hemp, Teflon tape, or thread sealing material.
SAREx 16.2 Control unit: electronic (MWG)
ACExC 01.2 Non-Intrusive Profinet
Tightening torque [Nm]
Strength class A2-80/A4 80
10
24
48
82
200
392