Transport And Storage; Transport - AUMA SAEx Series Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
ACExC 01.2 Non-Intrusive Profinet
3.

Transport and storage

3.1.

Transport

Actuator and actuator
controls
Weights
SAREx 16.2 Control unit: electronic (MWG)
For transport to place of installation, use sturdy packaging.
Hovering load!
Death or serious injury.
Do NOT stand below hovering load.
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
Actuators mounted to controls: Attach ropes or hooks for the purpose of lifting
by hoist only to the actuator and NOT to the controls.
Respect total weight of combination (actuator, actuator controls, gearbox, valve)
Secure load against falling down, sliding or tilting.
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Figure 7: Example: Lifting the actuator
Table 4:
Weight for ACExC 01.2 actuator controls
with electrical connection type:
AUMA Ex plug/socket connector with integral terminal connection
(terminal frame) and enlarged terminal compartment.
Transport and storage
Weight approx. [kg]
>14
13