Fenix TS2000 Series Operation Manual page 38

<00>H / <30>H Both internal tables A and B are selected.
<01>H / <31>H
<02>H / <32>H
<03>H / <33>H
[Default] n = <30>H
[Notes] Character table A corresponds to font A (12x24) format, and character table B
●
corresponds to font B (8x16) format.
[Reference] APPENDIX – INTERNAL CHARACTER TABLES.
ESC & y c1 c2 [table name] [ table data]
[Name] Load an external character table
[Format] ASCII
Hex
Decimal
[Range] y = <00>H to table A (12x24 format); y = <01>H to table B (8x16 format).
c1= <20>H; c2 = <FF>H
[table name] : 24 Byes (ASCII characters).
[table data] : 10752 bytes to table A or 3584 bytes to table B.
[Description] Load an external character table in non-volatile memory.
The memory space available for external tables only allows to load one table A
[Notes]
●
plus one B.
Loading a new table (A or B) means losing the previous loaded.
●
Through the self-test it can check the tables currently loaded in the printer.
●
[Reference] APPENDIX – INTERNAL CHARACTER TABLES.
ESC { n
[Name] Inverse printing mode
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <FF>H
[Range]
[Description] Turns inverse printing mode on/off.
When the LSB of n is 0, Inverse printing mode off.
A B C D
1 2 3 4 5
Inverse printing
n Character table selected
External loaded table A is selected.
Internal table B is selected.
External loaded table B is selected.
Internal table A is selected.
Both external loaded tables A and B are
selected.
ESC &
1B 26
27 38
Padded with <20>H ("SPACE" character) to get the 24 bytes, if needed.
20H to FFH → 224 characters
12 bits → 2 bytes; 224 x (2x24) = 10752 bytes.
8 bits → 1 byte ; 224 x (1x16) = 3584 bytes.
ESC {
1B 7B
27 123
mode OFF
TS2000 PRINTERS OPERATION MANUAL
y c1 c2 [table name]
79 c1 c2 [table name]
12 c1 c2 [table name]
n
n
n
Paper
feed
direction
[table data]
[table data]
[table data]
Inverse printing
mode ON
38/58