Fenix TS2000 Series Operation Manual page 34

ESC E n
[Name] Turn emphasized mode on/off
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <FF>H
[Range]
[Description] Turns emphasized mode on or off
When the LSB of n is 0, emphasized mode is turned off.
When the LSB of n is 1, emphasized mode is turned on.
[Notes] Only the least significant bit of n is enabled.
●
This command and ESC ! turns on and off emphasized mode in the same way. Be
●
careful when this command is used with ESC !.
[Default] n = <00>H
[Reference] ESC !, ESC G
ESC G n
[Name] Turn on/off double-strike mode
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <FF>H
[Range]
[Description] Turns double-strike mode on or off.
When the LSB of n is 0, double-strike (emphasized) mode is turned off.
When the LSB of n is 1, double-strike (emphasized) mode is turned on.
[Notes] Printer output is the same in double-strike mode and in emphasized mode.
[Default] n = <00>H
[Reference] ESC E
ESC I n
[Name] Turn reversed mode on/off
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <FF>H
[Range]
[Description] Turns reversed mode on or off
When the LSB of n is 0, reversed mode is turned off.
When the LSB of n is 1, reversed mode is turned on.
[Default] n = <00>H
[Notes] Only the least significant bit of n is enabled.
ESC J n
[Name] Print and feed paper
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <FF>H
[Range]
[Description] Prints the data in the print buffer and feeds the paper [n x 0.0625 mm (0.0024")].
[Notes] After printing is completed, this command sets the print starting position to the
●
beginning of the line.
The paper feed amount set by this command does not affect the values set by ESC 2
●
or ESC 3.
ESC E n
1B 45 n
27 69 n
ESC G n
1B 47 n
27 71 n
ESC I n
1B 49 n
27 73 n
ESC J n
1B 4A n
27 74 n
TS2000 PRINTERS OPERATION MANUAL
34/58