T H I S I S - Fenix TS2000 Series Operation Manual

ESC M n
[Name] Select character font
[Format] ASCII
Hex
Decimal
[Range] n = <00>H, <01>H, <30>H, <31>H
[Description] Selects the character font.
<00>H <30>H
<01>H <31>H
[Notes] ESC ! can also select character font types. However the setting of the last received
●
command is effective.
This command must be sent at the beginning of a line. If it is sent in the middle of a
●
line, all previous data in the print buffer is printed and the ticket is placed at the
beginning of the next line.
[Reference] ESC !
ESC V n
[Name] Character rotation
[Format] ASCII
Hex
Decimal
<00>H ≤ n ≤ <02>H, <30>H ≤ n ≤ <32>H
[Range]
[Description] Rotates the characters using the mode specified by n.
In both left and right 90º rotated modes, the characters lines transmission
order changes from the normal mode, because can be printing several lines at
once.
Example for right 90º rotation mode:
Characters lines transmission order
st
1 line:
2 nd line:
.
.
Last line: <SP> T
[Notes] The vertical and horizontal character scaling effect to paper feed direction regardless
●
of the character rotation setting.
It is not allowed both normal and rotated mode in the same character line.
●
When any rotated mode is setting, the inverse mode is disabled.
●
This command is enabled only when processed at the beginning of a line.
●
[Default] n = <30>H
[Reference] GS !
ESC M
1B 4D
27 77
n
Character Font A (12 x 24) selected
Character Font B (8 x 16) selected
ESC V
1B 56 n
27 86 n
n
<00>H / <30>H
<01>H / <31>H Right 90º rotated
<02>H / <32>H Left 90º rotated
T A T H <CR>
E <SP> H E <CR>
. . . . .
. . . . .
S <SP> <CR>
TS2000 PRINTERS OPERATION MANUAL
n
n
n
Function
n
Function
Normal
H E L L O
T H I S
A
T E S T
Paper feed direction
I S
P R I N T
35/58