Use In Vehicles For Transporting Persons With Reduced Mobility - Otto Bock Kimba Neo Instructions For Use Manual

2) Remove the quick-release axles from the rear wheels.
3) Open the eccentric lever of the front wheel.
4) Remove the front wheel with the splash guard from the fork.
5) Release the clip (see fig. 10).
6) Pull the locking pin out of the hole in the back brace and the lugs.
7) Slide the back brace out of the adapter and fold down the push bar (see fig. 8).
8) Insert the locking pin into the frame lugs (see fig. 7).
9) Insert the transport locks.
94
96

8.3.10 Use in vehicles for transporting persons with reduced mobility

WARNING
Improper use in vehicles for transporting persons with reduced mobility
Risk of serious injury when using the product as a seat
► The product has not been approved by the manufacturer for use as a seat in vehicles for transporting persons
with reduced mobility.
► In vehicles for transporting persons with reduced mobility, only use the seats installed in the vehicle with the
corresponding personal restraint systems.
► Information on the current status of our measures is available from the qualified personnel.
The product Kimba Cross has not been approved by the manufacturer for use as a seat in a vehicle for transporting
persons with reduced mobility.
Kimba Neo, Kimba Cross, Kimba Inline
95
Use
47