Securing The User In The Product - Otto Bock Kimba Neo Instructions For Use Manual

71
2

8.2.9.7 Securing the user in the product

Information on correct transport safety of the user in the vehicle for transporting persons with reduced
mobility
• The straps of the personal restraint system must always be routed close to the user's body. The straps must not
be routed over the side panels and wheels.
• The shoulder harness must always be routed over the user's shoulder.
• The belt strap must not be twisted on the user's body.
Placement of the personal restraint system integrated in the vehicle for transporting persons with
reduced mobility
For transportation in a vehicle for transporting persons with reduced mobility, the user must be secured in the
rehab buggy with positioning belts as follows:
1) Place the user in a nearly upright seated position.
2) Attach the ends of the restraint lap belt on the respective mounting point/pin on the left and right:
→ Pull one end of the lap belt from each side of the seat through to the bottom (see fig. 72, see fig. 73).
→ Engage the ends of the lap belt on the mounting points/pins provided (see fig. 74, item 1).
→ INFORMATION: the lap belt must be worn at an angle of 45° to 75° to the horizontal. When this is
not possible in exceptional cases, an angle between 30° and 45° to the horizontal can also be
chosen (see fig. 75).
3) Secure the shoulder harness on the mounting point/pin provided on the lap belt (see fig. 76).
73
Kimba Neo, Kimba Cross, Kimba Inline
72
74
Use
39