Platform For Respirator - Otto Bock Kimba Neo Instructions For Use Manual

Use
Installation tips
• The couplings with the plastic straps face to the rear and are tightened securely to the rear lashing points (see
fig. 51, item 1).
• The plastic straps face inwards (see fig. 51, item 2).
• The securing pins face from the inside to the outside (see fig. 51, item 3).
• The securing strap can be fastened above the folding lock to the ratchet joint (see fig. 52, item 1).
Note on use
• The folded-up buggy board must be secured with the securing strap supplied by the manufacturer (see fig. 52,
item 2).
50
52

8.2.7.5 Platform for respirator

WARNING
Prohibited use in vehicles for transporting persons with reduced mobility
Serious injuries resulting from accidents
► The option is not suitable for use in vehicles for transporting persons with reduced mobility. It must be
removed and stored safely prior to transport.
NOTICE
Overloading
Damage due to failure to observe specifications
► Please note that the maximum load of the overall product must not be exceeded even after loading the respir­
ator platform (see Page 56).
The respirator platform is for attaching respiration equipment. This is secured with straps using the slots on the
respirator platform.
The option has been installed in the following way, depending on the order:
32
51
Kimba Neo, Kimba Cross, Kimba Inline