Installation With A Seat Facing Opposite To Direction Of Travel - Otto Bock Kimba Neo Instructions For Use Manual

15
Respirator platform mounting kit overview
17
1 T2 respirator platform
2 T1 respirator platform
3 Retaining bracket with mounting materials

6.2.1 Installation with a seat facing opposite to direction of travel

Installing the T2 respirator platform
1) Glue the loop strap onto the centre of the front frame tube (see fig. 18).
INFORMATION: Trim the length to approx. 210 mm for size 1 and approx. 290 mm for size 2.
2) As shown in the image, glue the hook strap onto the angle tabs of the T2 respirator platform (see fig. 19).
3) Set the T2 respirator platform onto the front frame tube and axle tube (see fig. 20).
Kimba Neo, Kimba Cross, Kimba Inline
16
4 Bottom supports (with mounting materials)
5 Hook-and-loop straps
6 Side supports (with mounting materials)
Preparing the product for use
21