Adjusting The Wheel Lock; Adjusting The Seat Angle; Adjusting The Wheelbase - Otto Bock Kimba Neo Instructions For Use Manual

81

8.3.4.2 Adjusting the wheel lock

1) Loosen the counter nut (see fig. 82, item 1)
2) Turn the adjustment nut (see fig. 82, item 2)
3) Tighten the counter nut (see fig. 82, item 1).
82

8.3.5 Adjusting the seat angle

1) Loosen and open the knob on the left side of the chassis up to the stop (see fig. 83).
2) Push down on the spring-loaded knob so that the seat can be moved freely around the axle of the seat adapter.
3) Select the desired seat position.
4) Release the knob and wiggle the seat back and forth slightly to engage it.
5) Tighten the knob (see fig. 83).
83

8.3.6 Adjusting the wheelbase

1) Remove the two Allen screws on both sides of the oval tube front frame.
2) Push in or pull out the front frame to adjust it in the range of 800 mm to 920 mm (see fig. 84 and see fig. 85).
3) Reposition and tighten the two Allen screws of the oval tube front frame on both sides.
Kimba Neo, Kimba Cross, Kimba Inline
Use
43